Lingenfelter EFI Live Error Codes - Manual (Page 8)

8
$0086 Application Internal Flash CRC is incorrect.
Indicated by alternately flashing orange
LEDs on FlashScan’s front panel.
Each time FlashScan or AutoCal is powered
up, it tests the flash chip for consistency. If
that test fails the flash chip may have failed.
See Deadpoll mode below.
Reprogram the firmware.
Contact EFILive if this error persists.
$0087 Application External Flash CRC is incorrect.
Indicated by alternately flashing orange
LEDs on FlashScan’s front panel.
Each time FlashScan or AutoCal is powered
up, it tests the CPU’s flash memory for
consistency. If that test fails the CPU’s flash
memory may have failed.
See Deadpoll mode below.
Reprogram the firmware.
Contact EFILive if this error persists.
$0088 Application Internal and External Flash CRC
are incorrect.
Indicated by alternately flashing orange
LEDs on FlashScan’s front panel.
Both $0086 and $0087 errors occurred
simultaneously.
See Deadpoll mode below.
Reprogram the firmware.
Contact EFILive if this error persists.
$0089 Application Internal firmware is the wrong
size Internal Contact EFILive if this error persists.
$008A Application External firmware is the wrong
size Internal Contact EFILive if this error persists.
$008B Attempted to erase or reflash non-existent
flash memory Internal Contact EFILive if this error persists.
$008C License details have not been programmed
yet The FlashScan or AutoCal device was not
programmed with license information during
manufacturing. Contact EFILive if this error persists.
$008D Attempted to erase or reflash protected
flash memory Internal Contact EFILive if this error persists.