Lingenfelter EFI Live Error Codes User Manual
Page 27
27
$0526
Tune layout is not supported yet
The EFILive software and/or the
FlashScan/AutoCal firmware does not
recognize the tune file layout.
Please make sure the FlashScan/AutoCal
firmware is up to date and that the tune file
has been created/saved using the latest
software.
$0527
Tune file contains a bad controller
checksum.
The tune file has been flagged by the EFILive
software as having a bad checksum and
cannot be flashed into the controller.
Correct the faulty checksum(s) using the
V7.5 software. Be sure to read the warning
and to understand the implications of
correcting checksums.
$0530
License number in tune file does not match
FlashScan/AutoCal License number
The tune file has been configured to only be
allowed to be used with a particular
FlashScan/AutoCal device and the device
currently in use is not that device.
Contact the creator of the tune file and
request that the file be re-configured to
match your FlashScan/AutoCal device.
$0531
Serial number in tune file does not match
controller's serial number
The tune file has been configured to only be
allowed to be used with a particular controller
and the controller currently being flashed is
not that controller.
Contact the creator of the tune file and
request that the file be re-configured to
match your controller.
$0532
Controller not licensed.
An attempt was made to program a controller
before it was licensed.
License the controller before attempting to
program it. You can license a controller
using the on-screen prompts via FlashScan
or AutoCal.
$0533
No VIN-license slots available.
An attempt was made to license a controller
when no free VIN licenses slots were
available.
Additional VIN license slots can be
purchased for FlashScan devices from
EFILive’s on-line web store
AutoCal devices are limited to one VIN
license only.