Lingenfelter EFI Live Error Codes - Manual (Page 11)

11
USB Error Codes ($0100..$017F)
Error Description Cause Action
$0100 No USB connection USB cable is faulty or not connected Check USB cables, plugs and connections.
Try using a different USB port and/or
different USB cable.
$0101 No data received USB cable is faulty or not connected Check USB cables, plugs and connections.
Try using a different USB port and/or
different USB cable.
$0102 Transmit buffer is full Internal Contact EFILive if this error persists.
$0103 Received data message had no CRC data Internal Contact EFILive if this error persists.
$0104 Bad CRC on received data Internal Contact EFILive if this error persists.
$0105 Received data contained incorrect number
of parameters Internal Contact EFILive if this error persists.
$0106 Received data contained parameters that
were out of range Internal Contact EFILive if this error persists.
$0107 Received data message was too short Internal Contact EFILive if this error persists.
$0108 Received data message was too long Internal Contact EFILive if this error persists.
$0109 Received data message contained unknown
command group The firmware on the device is out of date Use the EFILive Control Panel software to
update the firmware to the latest version
available.