Lingenfelter EFI Live Error Codes - Manual (Page 4)

4
EFILive USB driver Error Codes ($0001..$001F)
Error Description Cause Action
$0001 USB internal driver error (invalid handle) Internal Contact EFILive if this error persists.
$0002 USB device is not connected FlashScan or AutoCal is not connected to the
PC’s USB system. Connect FlashScan or AutoCal to the PC
using a USB cable.
$0003 USB device is not open Internal Contact EFILive if this error persists.
$0004 USB I/O error Internal Contact EFILive if this error persists.
$0005 USB insufficient resources Internal Contact EFILive if this error persists.
$0006 USB invalid parameter Internal Contact EFILive if this error persists.
$0007 USB invalid baud rate Internal Contact EFILive if this error persists.
$0008 USB device not open for erase Internal Contact EFILive if this error persists.
$0009 USB device not open for write Internal Contact EFILive if this error persists.
$000A USB write error Internal Contact EFILive if this error persists.
$000B USB EEPROM read error Internal Contact EFILive if this error persists.
$000C USB EEPROM write error Internal Contact EFILive if this error persists.
$000D USB EEPROM erase error Internal Contact EFILive if this error persists.
$000E USB EEPROM not present Internal Contact EFILive if this error persists.
$000F USB EEPROM not programmed Internal Contact EFILive if this error persists.
$0010 USB invalid argument Internal Contact EFILive if this error persists.
$0011 USB device not supported Internal Contact EFILive if this error persists.
$0012 USB Unknown error Internal Contact EFILive if this error persists.