Lingenfelter EFI Live Error Codes - Manual (Page 17)

17
OBD Error Codes ($0280..$02FF)
Error Description Cause Action
$0280 Unsupported protocol (i.e. no vehicle
detected) FlashScan or AutoCal could not detect a valid
OBD protocol. Check all cables and connections.
Make sure ignition is turned on to the run
position.
Make sure the vehicle is supported by
EFILive.
$0281 No data received FlashScan or AutoCal did not receive valid
data from the connected vehicle. Check all cables and connections.
Make sure ignition is turned on to the run
position.
Make sure the vehicle is supported by
EFILive.
$0282 No such node Internal Contact EFILive if this error persists.
$0283 No such PID Internal Contact EFILive if this error persists.
$0284 Unknown PCI (Protocol Control Information) Internal Contact EFILive if this error persists.
$0285 Incorrect sequence ID Internal Contact EFILive if this error persists.
$0286 CAN, VPW or ALDL handler is busy Internal Contact EFILive if this error persists.
$0287 Dynamic packets are full Internal Contact EFILive if this error persists.
$0288 Response from controller not supported by
EFILive Internal Contact EFILive if this error persists.
$0289 PID selection is full Internal Contact EFILive if this error persists.