Lingenfelter EFI Live Error Codes - Manual (Page 19)

19
Controller Error Codes ($0300..$03FF)
Error Description Cause Action
$0310 General Reject ($10) The controller rejected the request for
unspecified reasons. Contact EFILive if this error persists.
$0311 Mode Not Supported ($11) The controller does not support the requested
OBD mode.
If you receive this error when attempting to
start Black Box Logging, try setting the device
setting: “Skip PID validation prior to starting
Black Box Logging.
” (aka “Skip Vfy”). That
will prevent $0311 errors that occur during
PID verification from preventing BBL from
starting.
Contact EFILive if this error persists.
$0312 Sub Function Not Supported or Invalid
Format ($12) The controller does not support the requested
OBD mode’s sub-function. Contact EFILive if this error persists.
$0321 Busy, Repeat Request ($21) A request was made by FlashScan or
AutoCal and the controller was too busy to
handle the request. Retry the operation.
Contact EFILive if this error persists.
$0322 Conditions Not Correct or Request
Sequence Error ($22) A request was made by FlashScan or
AutoCal and the controller was not able or
ready to handle the request. Retry the operation.
Contact EFILive if this error persists.
$0323 Routine Not Complete ($23) Internal Contact EFILive if this error persists.
$0331 Request Out of Range ($31) The controller does not support the requested
OBD mode’s, sub-function’s parameter. Contact EFILive if this error persists.