Lingenfelter EFI Live Error Codes - Manual (Page 24)

24
Reading/Flashing Error Codes ($0500..$05FF)
Error Description Cause Action
$0501 Script file name is too long Internal Contact EFILive if this error persists.
$0502 Script file not found The script (*.obj) file does not exist on the
device. Copy the required *.obj file to the device.
$0503 Script file not valid The script (*.obj) file is corrupt. Re-copy the *.obj file to the device.
$0504 Boot loader file not found The required boot loader (*.bix) file does not
exist on the device. Copy the required *.bix file to the device.
$0505 Tune file not found The required tune file does not exist on the
device. Copy the required tune file to the device.
$0506 Can’t create/save tune file Target file system is not writable Check that the target file system (Internal
flash or SD Card) is formatted.
Check that the write protect switch on the
SD Card is not set to locked
$0507 Operation would cause buffer overflow Internal Contact EFILive if this error persists.
$0508 Script aborted by user User interrupted script during a read or
programming operation Re-run script, allowing it to complete.
$0509 Incorrect file open mode Internal Contact EFILive if this error persists.
$050A Not enough space to save tune file SD Card or Internal Memory file system does
not contain enough free space to save the
target controller’s tune file image. Delete one or more files from
FlashScan’s/AutoCal’s file system.