Laerdal SimMan Essential - Manual (Page 17)

MANIKIN SETUP
17
attaching BleeDing MoDUleS
To simulate severe bleeding patients a separate ‘Bleeding Module’ kit can be purchased. The Bleeding Module kit contains:
• Amputated Arm SimMan 3G
• Gunshot Arm SimMan 3G
• Amputated Leg SimMan 3G
• Gunshot Leg SimMan 3G
For more information on how to assemble the Bleeding Module, please see the Directions for Use for the Bleeding Module kit.
Inserting and Connecting the Batteries
Open the torso as described in steps 1 - 4, Opening the Torso. To remove the batteries, follow the procedure listed below in reverse
order.
3 Snap the battery clamp back into place over the batteries. 4 Connect the corresponding battery cables from the
batteries to the torso.
1 Release the battery clamp by unhooking the clips on
either side.
2 Insert both batteries into the battery tray.
After connecting the batteries, connect the manikin to the external power supply while the manikin is OFF.
Battery - caBle DeScriptionS
name/label tube/cable color connector Description
Battery 1 Black harness cable White rectangular connector, 6 lead
Battery 2 Black harness cable White rectangular connector, 6 lead
For more information on charging the batteries see section, Manikin Setup, Battery Charging and Use.
SimMan Ess DFU_RevF.indd 17 18.07.12 13:54