Laerdal SimMan Essential - Manual (Page 16)

MANIKIN SETUP
16
attaching the left arM
Open the torso as described in steps 1 - 4, Opening the Torso. Follow the procedures listed below in reverse to detach the arms.
1 Align the left arm axle with the shoulder socket.
2 Ensure that the shoulder screw is loose enough to allow the arm axle to slide easily into place.
3 Feed the cables from the arm axle through the shoulder socket.
4 Carefully push the arm axle into the shoulder bracket, so that the axle is flush with the inside of the bracket.
LA PULSES
BP
LA
CONV
P B
L
BP
PULSES
L L LA
B
5 Tighten the shoulder screw with the Allen wrench.
6 Connect the arm cables to the corresponding connection points in the torso.
left arM connectionS for SiMMan eSSential & SiMMan eSSential BleeDing
name/label tube/cable color connector Description
LA Pulses Grey cable Black rectangular connector, 6 lead
BP Grey cable Black rectangular connector, 2 lead
attaching the right arM
Open the torso as described in steps 1 - 4, Opening the Torso.
Follow the procedures listed below in reverse to detach the arms.
1 Align the arm axle with the shoulder socket and feed the cables
from the arm axle through the shoulder socket
2 Push the axle into the bracket until it is flush with the inside of the
bracket.
3 Tighten the shoulder screw with the Allen wrench.
4 Connect the corresponding cables as shown below.
right arM connectionS for SiMMan eSSential & SiMMan eSSential BleeDing
name/label tube/cable color connector Description
Right Arm Black harness cable Black rectangular connector, 4 lead
Air Transparent tube White tube connector twist
Right Radial Grey harness cable Black with silver colored connector
SimMan Ess DFU_RevF.indd 16 18.07.12 13:53