HITEC MD10 - Manual (Page 29)

56 57
Use of Convex Stickers and Flat Stickers
The MD10 comes with a convex sticker and flat sticker for
adherence to different surfaces.
You can easily attach the camera onto helmets, vehicles, or
the surface of other devices.
M08 Curved Adhesive M15 Flat Adhesive
Precautions for 3M Double-sided Foam Tape:
1. Before using 3M double-sided foam tape, please select
an appropriate curved or flat surface where the tape can
adhere smoothly.
2. Before using 3M foam tape, please clean the surface to be
adhered to.
3. Before applying 3M foam tape, we suggest heating the
surface (a hairdryer may be used) if its temperature is
below -20°C.
The surface temperature of a power unit in use may increase.
This is normal.
Precautions with Waterproof Housing
The waterproof housing is a precision component. When using
the waterproof housing, adhere to the following precautions:
1. Do not randomly remove or change the O-ring, key, or lens
cover. Otherwise, the waterproof performance deteriorates.
2. Do not put the waterproof housing in a place where
corrosive gases are easily generated due to strong acid or
alkali. Do not make the waterproof housing in contact with
chemical or corrosive objects, such as strong acid or alkali.
3. To avoid deformation, do not put the waterproof housing in
a place where temperatures are high (50°C) or low (-10°C)
for a an extended time.
4. Do not expose the MD10 video camera to sunshine for
an extended time to avoid deterioration of the waterproof
performance.
5. Before use, ensure that the O-ring is intact, the seal is
clean, the housing itself is fully sealed, and the buckle is
tight.
6. After using the housing in a salt water environment, wash it
clean using fresh water. Dry and store in a temperate place.
Specifications
Description Specifications
Visual angle 120°
Aperture f/2.6
Pixel 8 Megapixel