HITEC MD10 - Manual (Page 15)

28 29
Resolution Setting
You can select from the following recording resolutions:
PAL System NTSC System
1920×1080P 25f 16:9
1280×720P 50f 16:9
WVGA 100f 16:9
1920×1080P 30f 16:9
1280×720P 60f 16:9
WVGA 120f 16:9
View Angle
You can set the view angle to Wide, Medium, Narrow and
Small:
Wide Medium
Narrow Small
This function is not available in 720P and WVGA mode.
Bit Rate
You can set the bit rate to Fine or Normal ("Fine" produces a
clearer image and larger file size).
Video Content Loop
You can activate or deactivate the loop recording function. If
the function is ON, the video file will be automatically stored
in segments of 10 minutes; If the function is OFF, the video file
will be stored in segments of 15 minutes.
180° Image Rollover
When this function is activated, an upright video file is
produced even when using the MD10 to shoot video upside
down.
This function is not available in WVGA mode.
Display Time
You can choose to display or not display the video recording
time at the bottom right corner of the photo.
This function is not available in WVGA mode.