HITEC MD10 - Manual (Page 20)

38 39
1. Total number of files
2. Wi-Fi status
3. Battery status
4. Remaining recording time or
number of shots
5. Recording duration
6. Video record
7. Single 8. Maximize preview
9. Current state icon / Start /
Stop key
10. Parameter settings
11. Zoom out
12. Zoom in
13. Playback mode
14. Fast Shot/Burst
You can remotely control your camera by clicking the
icons on the main interface.
: Display the remaining recording time in video
recording mode.
Display the remaining number of shots in photo
shooting mode.
The mobile device must be used within a maximum
distance of 100 meters from the MD10 at a horizontal
angle in an obstacle-free zone.
The real-time preview is unavailable for video recording in
the 720P and WVGA modes.
Operating Instructions for Wi-Fi Control Interface
1. Video Record
Click the Video record mode icon " ". The current state icon
will dispaly as " ", click it to start / stop video record.
Click the icon " " to maximize the preview (See Fig. 3).
Angle
Current state
Return to
main interface
Recording
duration
Resolution
and frame rate
Remaining
recording time
Fig. 3 Video Record Mode
You can set up your desired video resolution in the parameter
setting interface.