HITEC MD10 - Manual (Page 10)

18 19
Voice-Activated Power-On
Slide the Power key to "VOX" and the MD10 will enter voice-
activated mode. When the ambient decibel reaches 75db, the
MD10 will begin recording. It may auto-stop recording 3min
later if the ambient decibel becomes lower than 75db. In the
recording process, you can press the Record key to stop
recording without influencing any other function.
Language
To select the required language:
1. Long-press the Record key for 3s to enter full- screen mode.
2. Press the Shoot key or the Wi-Fi key to adjust the menu
mode to " " and then press the Record key.
3. Press the Wi-Fi key to move the cursor to " " and then
press the Record key.
4. Press the Wi-Fi key to select " " and then press the
Record key.
5. Press the Wi-Fi key to select the required language and then
press the Record key to confirm your selection.
6. Press the Shoot key to exit.
Date and Time
1. Long-press the Record key for 3s to enter the full-screen
mode.
2. Press the Shoot key or the Wi-Fi key to adjust the menu
mode to " " and then press the Record key.
3. Press the Wi-Fi key to move the cursor to " " and then
press the Record key.
4. Press the Wi-Fi key to select " " and then press the
Record key.
5. Press the Wi-Fi key to select the required date format and
then press the Record key to enter the following interface:
Y-M-D H:M
M-D-Y H:M
D-M-Y H:M
14 /01/01
YY/MM/DD
16:35
HH/MM
6. Press the Shoot key or the Wi-Fi key to adjust each value
and then press the Record key to confirm the adjustment.
The MD10 will auto-exit from the above interface when all
adjustments are finished.
7. Press the Shoot key to exit.