beautypg.com

Trim videos, Change wi-fi connection name and password – HITEC MD10 User Manual

Page 24

background image

46

47

Trim Videos

When viewing the downloaded files on the mobile device, you
can click the icon "

" at the bottom of the screen to access

the video trimming interface shown in the figure below:

Save and share

video file

End frame

Start frame

Current frame

Storyboard

Narrow the frame

Expand the frame

Play icon

Click the icon to save and share the edited video file. This
function allows you to take a clip out of the video to generate
another video by changing the starting frame and ending
frame.
To accomplish this, use 1 of the 2 methods detailed below:
Method One: change the starting frame and ending frame by
dragging the time frame panel (click the Play key for previewing
until the best location is reached).
Method Two: click "

" to set the current frame as the

starting frame, drag the time frame panel to change the current

frame, and then click "

" ]” again to set the current frame

as the ending frame.

Change Wi-Fi Connection Name and Password

1. To change the Wi-Fi connection name:
Connect your camera (with TF card installed) to the

computer and turn your camera on. On the computer,
double click "My Computer" to find and access the
removable disk, and then open the"

" WiFi.conf file in

the folder "MISC." Find "AP_SSID=AEE Magicam." Change
the content following the equal sign "=" to your desired
name and save it.

2. To change the Wi-Fi connection password:
Connect your camera (with TF card installed) to the

computer and turn your camera on. On the computer,
double click the icon "My Computer" to find and access
the removable disk, and then open the "

" WiFi.conf

file in the folder "MISC." Find "AP_PASSWD=AEE12345."
Change the content following the equal sign "=" to your
desired password (containing 8 digits) and save it. (Please
note, only 8-digit passwords are supported.)

In case of synchronous operation of the camera and the

Wi-Fi based remote control, the MD10 will give priority to
the operation command from the camera.

Above images for reference only, subject to app availability.