Heath Consultants GT Series - Manual (Page 99)

10-1
PRESSURE MODE
PRESSURE MODE
In this mode, the instrument can be used as a manometer
to measure appliance and regulator pressure and to check
the system for leaks.
Note 1: It is important to zero the pressure mode before
taking measurements.
Note 2: Pump is OFF in pressure mode.
10.1 PRESSURE RANGES
Pressure mode will have either of the following
configurable ranges available:
• -9.9 to 60in Water Gauge (Resolution 0.1in)
• -99 to 150mBar (Resolution 0.1mBar)
10.2 PRESSURE FEATURES
Pressure mode will have the following features available:
• Backlight
• Display Invert
10