Heath Consultants GT Series - Manual (Page 32)

3-10
USER HANDBOOK
Fig. 3.14 Switch OFF
To proceed with the switch-off sequence.
• Press and hold both the LH button and the RH
button simultaneously.
3.6 SERVICE DUE DATE
The Service due date can be set by the workshop and is
set to two (2) years by default from last service date. The
date can be set over a period of 1 to 36 months in 1 month
steps.
Note : The service due date will not normally be
displayed at start up but if display is
selected, it will be shown at 90 days prior
to the preset date, as shown in Fig. 3.15.
The SERVICE DUE feature has five (5) configurable
options:
1. Service Due Date message is not displayed
(Default).