Heath Consultants GT Series - Manual (Page 61)

5-7
CONFINED SPACE MODE
5.5.4 Flow Fault
Before clearing a flow fault alarm the instrument must be
checked for water ingress or blockage.
To clear a Flow Fault alarm:
• Press the RH button .
5.5.5 Manual Log
A manual log can be taken at any time.
To capture a manual log:
• Press and hold the RH button .
Note: When a manual log is taken, the term ‘LOG’ is
inversed on the display for one (1) second to
provide a visual confirmation that the log has been
captured.
5.5.6 Menu / Off
To re-select the Mode Menu:
• Press and hold both the LH button and the RH
button .
When the menu appears on the screen, release
the buttons, otherwise the instrument will proceed
into the switch OFF process and will switch OFF
after a further three (3) seconds.