Heath Consultants GT Series - Manual (Page 150)

12-26
USER HANDBOOK
To install instrument in charging station:
1) Check that instrument charging contacts, shown
in Fig. 12.20, and the station charging contacts,
shown in Fig. 12.21, are clean and free of dirt /
grease.
Fig. 12.20 Instrument Charging Contacts
2) Make sure that the instrument is switched OFF.
3) Locate extension pole recess in instrument handle
over location in charging station then locate
instrument handle in storage clip and engage
securing strap. Refer to Fig. 12.19 and Fig. 12.21.
C12.pmd 22/06/2006, 11:43 26