Hanna Instruments HI 933300 - Manual (Page 3)

1
GENERAL DESCRIPTION
The HI933300 and HI933301 are multirange
conductivity meters equipped with printer and
datalogger (HI933300 only).
The measurement interval is user-selectable
from 1 to 180 minutes, and the temperature
coefficient
β
can vary from 0.0 to 3.0%/°C.
These microprocessor-based meters provide
automatic calibration with 5 memorized val-
ues:
• 0 µS/cm (µmhoS/cm)
• 84 µS/cm (µmhoS/cm)
• 1413 µS/cm (µmhoS/cm)
• 12880 µS/cm (µmhoS/cm)
• 80000 µS/cm (µmhoS/cm).
This makes the calibration procedure ex-
tremely simple.
HI933300 can also log and directly print the
conductivity and temperature measurements.
PRELIMINARY EXAMINATION
Remove the instrument from the packing ma-
terial and examine it to make sure that no
damage has occurred during shipping. If there
is any damage, notify your Dealer.
Each printing/logging conductivity meter is sup-
plied complete with:
• HI 76302W Conductivity Probe with
1 m (3.3') screened cable
• AA size Alkaline Batteries (4 pcs)
• Paper roll (10 pcs)
• Rugged carrying case
Note: Save all packing materials until you are
sure that the instrument functions cor-
rectly. All defective items must be re-
turned in the original packaging together
with the supplied accessories.