Hanna Instruments HI 933300 - Manual (Page 17)

15
To view the date, press the UP arrow key
when the LCD is displaying the time.
To view the conductivity and temperature press
the RANGE key. Conductivity will be dis-
played on the primary display and tempera-
ture on the secondary (without decimal point).
To view the temperature press the RANGE
key again. The temperature will be displayed
on the primary display with a decimal point.
SETTING THE TEMPERATURE COEFFICIENT
Press the RANGE key until the display shows
the temperature coefficient setting.
This value is adjustable from 0.0 to 3.0%/°C.
DATE
CAL
RANGE
mS
RANGE
°C
RANGE
%