Hanna Instruments HI 93414 - Manual (Page 49)

49
• Replace the cover and press it until it locks.
• Turn the instrument ON.
Warning: Replace batteries only in a non-hazardous area.
USING AN AC ADAPTER
The
HI 93414 can be powered from the AC adapter when used in laboratory. See the Accessories
section to select the correct AC adapter.
To power the instrument, simply connect the AC adapter to the instrument (see page 10, “Connectors
Description”).
It is not necessary to turn the instrument off when connecting the external adapter.
Note: The connection to the external adapter will not recharge the batteries.
PC INTERFACE
To fully use the instrument tag identification system function, the measured data has to be
downloaded to a computer. The instrument can use RS232 or USB connection to communicate
with the PC.
When using the RS232 protocol, simply connect a
HI 920011 serial cable between the
instrument and the computer.
To use the USB protocol, simply connect a regular USB cable between instrument and PC.
In both cases, the PC must run the
HI 92000 application for successful data transfer.