Hanna Instruments HI 93414 - Manual (Page 45)

45
• Press the ▲ or ▼ keys to set the hour value.
• Press LOG/CFM or READ/TIMER to start
editing the minutes. The minutes value will
start blinking.
• Press the ▲ or ▼ keys to set the minutes
value.
Note: To edit the hour again, after the minutes
were edited, press READ/TIMER .
• Press LOG/CFM to save the new time. The
new set time will be displayed. Alternatively,
press
CAL/CHECK to exit without saving the
changes.
SET INSTRUMENT ID
The instrument ID is a four digit number that can be edited by the user. The instrument ID is
downloaded on the PC application, together with the logged data. By setting a different ID for each
instrument it is possible to mix information from many turbidimeters into the same database.
• To set the instrument ID, press CAL/CHECK
when set instrument ID panel is displayed. The
default instrument ID is 0000. The existing ID
value and “
CFM” tag will start blinking.
• Press the ▲ or ▼ keys to set the new
instrument ID. By pressing and holding the ▲
or ▼ keys, the speed will increase.
• Press LOG/CFM to save the change. The new
instrument ID will be displayed. Alternatively,
press
CAL/CHECK to exit without saving the
changes.