Hall Research CNT-IP-2 - Manual (Page 6)

Web Enabled Serial Controller
6
4.1 Find & Assign Static IP Address
This section covers all the steps necessary to setup your system on your
internal DHCP compatible LAN.
4.1.1 IP Address
The CNT-IP-2 device comes preconfigured for DHCP so they automatically
obtain an IP address when it is connected to the computer LAN.
It is always recommended that you set a static IP on each system in order to
guarantee it maintains that same IP address between system power cycles.
4.1.2 Find Current IP address
Before you can access the device on your browser, you need to know what
IP address has been assigned to it by your LAN.
Download and install the
Device Finder utility available on Hall Research
Website. This software can run on both Windows and MAC computers.
Once installed, run the Device Finder program. It will scan your LAN and
locate any compatible Hall Research IP devices that are connected to your
LAN network
Your Device’s IP
Device Finder Utility