Hall Research CNT-IP-2 - Manual (Page 14)

Web Enabled Serial Controller
14
Location
User assigned location provided for location information, like a Room
number. This field information is shown when using the Device Finder GUI.
Date & Time
Used to set the system Date & Time. System events are scheduled using this
time and date.
Logo
Enable or Disables whether the Hall Research Logo appears on the webpage.
Reboot
Causes a system reboot. This takes approximately 15-20 seconds to
complete.
Factory Defaults
Used to restore the default configuration for the system. This will erase all of
the user changes to the configuration.
Always backup the file by using the ‘Download’ feature described
below.
Upload
Used to upload new configuration files into the system. The configuration
file stores all settings and configuration information about the CNT-IP-2
system. The device must be rebooted before the new configuration settings
are used.
Download
Used to download the current system configuration settings. These settings
can be used as a backup and also copied into other CNT-IP-2 systems.