Hall Research CNT-IP-2 User Manual
Page 2
Web Enabled Serial Controller
2
Table of Contents
1.0 Introduction ............................................................... 3
2.0 Features ..................................................................... 4
3.0 Hardware Installation ................................................. 4
4.0 Software Setup ........................................................... 5
4.1 Find & Assign Static IP Address ........................................... 6
4.2 Configuration Files .............................................................. 7
4.3 Firmware Upgrade .............................................................. 9
4.4 Web Manager ..................................................................... 10
Troubleshooting ......................................................... 27
6.0 Specifications ............................................................. 28
TRADEMARKS USED IN THIS MANUAL
Hall Research and its logo
are trademarks of Hall Research. Any other
trademarks mentioned in this manual are acknowledged as the property of the
trademark owners.
FCC RADIO FREQUENCY INTERFERENCE STATEMENT
This equipment generates, uses, and can radiate radio frequency energy and if not
installed and used properly, that is, in strict accordance with the manufacturer’s
instructions, may cause interference to radio communication. It has been designed to
comply with the limits for a Class A computing device in accordance with the
specifications in Subpart B of Part 15 of FCC rules, which are intended to provide
reasonable protection against such interference when the equipment is operated in a
commercial environment. Operation of this equipment in a residential area is likely to
cause interference, in which case the user at their own expense will be required to take
whatever measures may be necessary to correct the interference.
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.