Hall Research CNT-IP-2 - Manual (Page 22)

Web Enabled Serial Controller
22
4.4.4.4 Buttons
The buttons page is used to assign actions, groups and pages to specific
buttons.
Enabled/Disabled
Enables or disables a button. A disabled button will not display on the
Control Tab of the Web Interface.
Label
The label is the name that refers to the button. The label appears on the
button on the control page. The number of characters in the label affects the
width of the button.
Momentary/Toggle
If the button is set for toggle, it will alternate between Action 1 and Action 2
each time it is pressed.
Buttons’ set for momentary only perform Action 1. Action 2 will not
execute.