Hall Research CNT-IP-2 - Manual (Page 16)

Web Enabled Serial Controller
16
Secondary DNS
Only used when DHCP is disabled and in a static IP address configuration.
This field specifies an optional secondary DNS server address.
Serial Port #1
These fields specify the baud rate and parity settings for Serial Port #1
Serial Port #2
These fields specify the baud rate and parity settings for Serial Port #2
External Devices
Other Hall Research or 3
rd party controllers
that are IP enabled can be setup as External
devices. These devices are usually assigned
static IP addresses and are controllable over a
specific PORT number. For example, CNT-
IP-2 and VSA-51 devices can be controlled
over PORT 23. HSM devices can be
controlled on PORT 6324.
External Devices are initially created by clicking the “+” button. Devices
previously created are displayed and can be modified (except for the
‘NAME’. The user must provide a unique name for the device; specify its
network IP address and the Port number that this device will be controlled
on. The device must exist on the network and must be able to be ‘pinged’.
When all fields have valid entries, the user must ‘SAVE’ the configuration
by clicking the ‘Save’ Icon in the upper right corner of the screen.
4.4.4.1.3 Themes Tab
The Theme Tab lists the available color
themes for the system. Click on the
desired color theme and click the “SAVE”
icon in the upper right corner of the
screen. The GUI will refresh and the new
color theme will be used.
External Device