Hall Research HSM-I-08-08 - Manual (Page 23)

Genesis Digital™ HDMI Matrix Switches
21
Figure 10 – Control via web Interface
Web interface allows the user to change/monitor matrix I/O ties, assign names to
Inputs, outputs and presets as well as change IP address, assign static IP address,
enable/disable password protected login etc…
Preset, Input and Output names are saved permanently in matrix unless user changes
it. Matrix also remembers Presets even when not powered.
The web interface is very user friendly and easy to access. It consists of three tabs
named Routing, Labels and Settings. Each tab, its sub tabs and its features are
explained in next sections.
5.2.1 Routing Tab
Routing tab allows user to control matrix I/O ties, save current configuration as preset,
load existing presets and turn the matrix On/Off. Routing tab consists of two sub tabs
named Video and Audio. Video routing sub tab is used to control HDMI I/O ties where
as audio routing sub tab is used to control SPDIF audio I/O ties.
5.2.1.1 Video routing sub tab
Please refer to Figure 11 for a typical screen of Video routing sub tab as it would
appear on a Smart-Phone.