Hall Research HSM-I-08-08 - Manual (Page 21)

Genesis Digital™ HDMI Matrix Switches
19
Port 80
Web Server
Serial
Control
HTTP
Control
Notice
As shipped from factory DHCP is enabled. This means that the network
automatically assigns an IP address to your Matrix.
To find the IP address assigned to the matrix, please use Device Finder Software
to get current IP address of Matrix.
Device Finder is available on the Product’s webpage.
Telnet
Control
Matrix
Command
Processing
RS-232
Port
IP
Control
5. IP Control Basics
Figure 8 – IP Control Block Diagram
As shown in the figure above, the matrix can be controlled via RS232 Serial port or
through an IP (Ethernet) port if equipped.
The IP interface features a built-in web server allowing web browsers running on
different devices (computer, smart-phone, tablet) on the network to control and
monitor matrix through HTTP protocol on port 80. (Section 5 will walk you through this
HTTP based Web Interface).
The IP interface also supports telnet connection over port number 6324 to control and
monitor matrix. (Section 6 will walk you through this telnet-based interface)
The IP interface on every matrix shipped has a unique MAC-address, and must have a
valid IP-address to function properly on the network.
Port 6324
Telnet Server