Hall Research HSM-I-08-08 - Manual (Page 18)

HSM-I-08-08
16
Issuing a factory Defaults command will set all current and preset HDMI Audio/Video ties
plus SPDIF Audio ties 1 to 1 as if issuing a command COn,m where n = m = 1-8. Holding
the PWR button down for 1 second while powering up the HSM Matrix will also perform a
Factory Defaults.
4.5 Firmware Version
Command:
FW stands for Firmware Version
Response:
FP Version:x.x Front Panel Firmware Version
Main Version:x SW:x.xx Main Firmware Version
Input Version:x SW:x.xx Input Firmware Version
Output Version:x SW:x.xx Output Firmware Version
4.6 HDMI Output (Blank Video & Mute Audio)
Command:
HOn,x stands for HDMI Video & Audio output (where
Response:
HOn,x n = output [1-8], x=[0-1] = [disconnect-connect])
Query:
Command:
HO*,x stands for HDMI Video & Audio output (where
Response:
HO1,x * = all outputs, x=[0-1] = [disconnect-connect])
HO2,x
HO3,x
HO4,x
HO5,x
HO6,x
HO7,x
HO8,x
4.7 HDMI Audio
Command:
HAn,x stands for HDMI Audio activation (where
Response
HAn,x n = output [1-8], x=[0-1] = [not active-active])
Query:
Command:
HA*,x stands for HDMI Audio activation (where
Response:
HA1,x n = output [1-8], x=[0-1] = [not active-active])
HA2,x
HA3,x
HA4,x
HA5,x
HA6,x
HA7,x
HA8,x
4.8 Menu Contrast
Command:
MCx stands for LCD menu contrast (where x = 1-100)
Response
MCx
Query:
Command:
MC stands for LCD menu contrast Query
Response:
MCx (where x = 1-100)