Glow-worm 23c - Manual (Page 13)

13 2000225000B
7 Fixing Jig Pack
The fixing jig is made up as follows:
A - Heating return fitting with isolating valve (v).
B - Cold water inlet fitting with isolating valve (m).
The cold water inlet restrictor supplied with boiler is
fitted when the boiler is installed. Refer to Section 9.
C - Heating flow fitting with isolating valve (q).
D - Domestic hot water outlet.
E - Gas fitting.
Diagram 7.1
A
B
C
D
E
COPPER
CONNECTIONS
AND WASHERS
(5 OFF)
F
m
v
THE FIXING JIG
SHOWN ASSEMBLED
Other components within the fixing jig pack.
F - Hanging bracket
G - wall template
H - copper connections
J - sealing washers and screws
RIGHT
HAND
SUPPORT
BRACKET
LEFT
HAND
SUPPORT
BRACKET
ISOLATING
VALVE
PLATE
SCREW
9897
q
9717
G
J
H
1 Heating systems connections
- Pipe diameter 22mm
2 Hot water system connections
- Pipe diameter 15mm
3 Gas connection
- Pipe diameter 15mm
H