EZ-ACCESS TITA MODULAR ACCESS SYSTEM - Manual (Page 21)

– 21 –
8.7 At an intermediate turn platform on an inside corner (FIG. 39):
8.7.1 Hold two 90 degree elbows in position with the adjustable elbow and mark for trimming.
8.7.2 After trimming, test fit elbows, handrail brackets and spacers.
8.7.3 Attach long legs of 90 degree elbows to adjustable elbow with ring joiners then attach both
elbows to handrail tubes with ring joiners.
8.7.4 Attach handrail brackets and spacers to guard post using one 5/16” x 1-1/2” self drilling
square drive screw per bracket to secure (FIG. 40).
8.7.5 Attach elbows to handrail brackets using one 1/4” x 1” long self drilling square drive screw
per bracket, then Tighten all fasteners securely.
FIG. 39
FIG. 40