Fig. 37, Fig. 38 – EZ-ACCESS TITA MODULAR ACCESS SYSTEM User Manual

Page 20

Text mode
Original mode

– 20 –

8.6

At a turn-back platform on the inside, turn-back side (FIG. 37):

8.6.1 Hold two 90 degree elbows in position and mark for trimming.
8.6.2 After trimming, test fit elbows, handrail brackets and spacers.
8.6.3 Attach long legs of elbows in the middle with a ring joiner, and then attach both elbows to

handrail tubes with ring joiners (FIG. 38)

8.6.4 Attach handrail brackets and spacers to guard filler section by drilling 5/16” dia. hole

through the filler picket.

8.6.5 Use one 5/16”-18 x 3” bolt, nut and washer per bracket to secure.
8.6.6 Attach elbows to handrail brackets using 1/4” x 1” self drilling square drive screw per

bracket.

8.6.7 Tighten all fasteners securely.

FIG. 37

FIG. 38