EXFO IQS-2600B Tunable Laser Source for IQS Platforms - Manual (Page 84)

SCPI Command Reference
78 IQS-2600B
Product-Specific Commands—Description
:SOURce[1..n]:POWer[:LEVel]
[:IMMediate][:AMPLitude]
Description This command sets the source output power
level. This value can be set even if the source is
off.
At *RST, the power level is -8.0 dBm.
Syntax :SOURce[1..n]:POWer[:LEVel][:IMMediate][:AM
PLitude]DBM]>|
MAXimum|MINimum|DEFault
Parameter(s) OutputPower:
The program data syntax for is
defined as a element
followed by an optional
DATA> element. The allowed
PROGRAM DATA> element is DBM. The
special forms MINimum,
MAXimum and DEFault are accepted on input.
MINimum allows to set the instrument to the
smallest supported value.
MAXimum allows to set the instrument to the
greatest supported value.
DEFault allows the instrument to select a value
for the parameter.
This parameter is the new source output power
value in dBm.