EXFO IQS-2600B Tunable Laser Source for IQS Platforms - Manual (Page 118)

SCPI Command Reference
112 IQS-2600B
Product-Specific Commands—Description
:SOURce[1..n]:WAVelength:SWEep:
STATe
Description This function starts or stops the sweep program.
The sweep program makes the optical
wavelength sweep from a start wavelength to a
stop wavelength, as specified in the sweep
parameters.
At *RST, the sweep state in off.
Syntax :SOURce[1..n]:WAVelength:SWEep:STATe
>
Parameter(s) State:
The program data syntax for is defined
as a element. The
special forms ON and OFF are accepted
on input for increased readability. ON
corresponds to 1 and OFF corresponds to 0.
The parameter is a value representing
the state of the sweep program.