EXFO IQS-2600B Tunable Laser Source for IQS Platforms - Manual (Page 106)

SCPI Command Reference
100 IQS-2600B
Product-Specific Commands—Description
:SOURce[1..n]:WAVelength:SWEep:
REPeat?
Description This query returns the sweep looping mode. The
module can perform the sweep continuously or
execute the sweep according to the number of
cycles specified.
At *RST, the repeat mode depends on the
number of cycles.
Syntax :SOURce[1..n]:WAVelength:SWEep:REPeat?
Parameter(s) None
Response Syntax
Response(s) Repeat:
The response data syntax for is
defined as a
element.
The response is the current state of
the sweeps repeat function:
CONTinuous, the sweep is performed
continuously.
NCONtinuous, the sweep is performed according
to the number of times specified by the sweep
cycle value.
Example(s) SOUR:WAV:SWE:REP CONT
SOUR:WAV:SWE:REP? returns CONTINUOUS
See Also SOURce[1..n]:WAVelength:SWEep:REPeat
SOURce[1..n]:WAVelength:SWEep:CYCLe