EXFO IQS-2600B Tunable Laser Source for IQS Platforms - Manual (Page 48)

Monitoring Your Tunable Laser Source
42 IQS-2600B
Using Monitor Windows
To select modules and display their monitor windows:
1. On the Current Modules function tab, select the controller or
expansion unit containing the modules you want to monitor.
2. In the Monitor column, select the box next to each module you want
to monitor.
If you want to monitor all the modules in the current unit, click Select
All Monitors. If you want to clear your choices, click Deselect All
Monitors.
3. Click Start Monitor to apply your selection.
IQS Manager will display the selected monitor windows on the
Monitors function tab.
Note: To start the highlighted module’s corresponding application at the same
time, click Start App. & Monitor. The application will appear in a different
window.
Selected modules
(checked)