EXFO IQS-12002B Calibration System - Manual (Page 20)

Getting Started with Your Calibration System
16 IQS-12002B
Starting and Exiting the Calibration System Application
Starting and Exiting the Calibration System
Application
To start the Calibration System application:
1. Turn on the IQS-500 controller and expansion units.
2. Turn on the computer on which the application is installed and log on
as “operator” or “manager” and enter the password.
3. From the computer, on the Windows taskbar, click the Start button
and select Programs > EXFO > IQS-12002B.
OR
Double-click the IQS-12002B Calibration System icon.
4. When the application prompts you, log on to the system.
I
MPORTANT
Wait until the LED push button of all the modules (except the
polarization or mode scrambler) light up before starting the
application. Otherwise, the application will not be able to link to
the hardware.