beautypg.com

Electrical sonet/dsn/sdh/pdh interface connection – EXFO FTB-8100 Series Transport Blazer for FTB-500 User Manual

Page 35

background image

Physical Interfaces and LEDs

SONET/SDH Application

21

Electrical SONET/DSn/SDH/PDH Interface Connection

Electrical SONET/DSn/SDH/PDH Interface

Connection

³

2M-155M port: The FTB-8105/15/20/30 provides two BNC connectors,
labeled 2M-155M IN and OUT, for E1/2M, E2/8M, E3/34M, DS3/45M,
STS-1e/STM-0e/52M, E4/140M, STS-3e/STM-1e/155M testing capability.
Connector type is BNC for coaxial 75-ohm cable connection.

³

1.5M/2M Bantam port: The FTB-8105/15/20/30 provides an IN/OUT
Bantam connectors for DS1/1.5M and E1/2M testing capability.

³

1.5M/2M RJ-48C port: The FTB-8105/15/20/30 provides an IN/OUT
RJ-48C connectors for DS1/1.5M and E1/2M testing capability.

Note: Dual RX test case uses the BNC labelled AUX as the second RX port.

Connect the signal to be tested to the corresponding port.