EXFO FTB-700 for FTB-1 - Manual (Page 256)

Analyzing Traces with the Bidirectional Analysis Application (Optional)
248 FTB-700 Series
Setting Pass/Fail Thresholds
4. If you want to apply the thresholds you have just defined to one or
several other wavelengths, proceed as follows:
4a. Press the Copy to Other Wavelengths button.
4b. Select the boxes corresponding to the wavelengths for which you
want to use the same thresholds.
Note: You can use the Select All button to quickly select all boxes at the same
time.
4c. Press OK to confirm you selection.
5. Press Apply to confirm the changes, then OK to return to the main
window.