EXFO FTB-700 for FTB-1 - Manual (Page 192)

Creating and Generating Reports
184 FTB-700 Series
Generating a Report
Once you generate a report, the application will keep in memory the items
you have included in your reports for future use.
Pass/Fail thresholds: loss, reflectance, fiber section
attenuation thresholds as they are defined in OTDR
setup, under Event table.
Note: Selecting this item will not highlight the
failed results in the report. You must
configure the application to display fail
or warning results from the OTDR setup
and include the Event table item in your
report.
X X X
Graph: You can select the Zoom item if you want the
traces to be generated with the zoom factor you
selected:

Manual zoom: Graphs will be generated exactly as
they appear on screen. The same zoom factor will
be applied to all traces (wavelengths) of a
particular file.

Zoom on selected event: Graphs will be generated
with zoom on the area corresponding to the
selected event (one event per trace, that is, one
per wavelength).
By default, this item is selected.
X X X
Item appearing on the report
Auto
mode
Advanced
mode
Template
mode