EXFO FTB-5230S Optical Spectrum Analyzer for FTB 200 v2 - Manual (Page 55)

Setting Up the Instrument in WDM Mode
OSA/OCA 49
Defining Preferences
4. Under Location Information, define the following parameters as
needed:

Network element: Sets the type of network element.

Test point: Sets the location where the test is performed on the
link.

Description: Enter the description of location if required.
5. Press OK to save the changes and close the window, or press Cancel to
exit without saving.
Press Restore Defaults to remove all the changes and apply the default
values.