Eurocom M660N MILANO - Manual (Page 160)

Windows XP Information
D - 6 Function Keys/Hot Keys
D
Recording Audio
The audio record hot key button allows you to record audio (the hot key program
must be running - see sidebar) from either the built-in microphone, or from a micro-
phone connected to the microphone-in jack. To record on the computer, setup the au-
dio recording options in Windows as follows (see
Figure D - 4 on page D - 7 ).
1. Go to the Start menu and point to Settings (or just click Control Panel) and click
Control Panel, then double-click the Sounds & Audio Devices icon (Sounds,
Speech, and Audio Devices in Category View).
2. Click Advanced in the Volume > Device volume tab.
3. Click Options and scroll down and click Properties.
4. Select Realtek HD Audio input from the Mixer device menu.
5. Click Mic Volume (check box) if it is not checked, then click OK.
6. Make sure the Select (check box) in the Recording Control panel, under the Mic
Volume section, is checked (boost the volume as high as it will go).
7. Close the Recording Control window, and then click OK.
8. Press the
audio record hot key button to begin the recording process (the record
icon will flash in the top left of the screen).
9. Press the audio record hot key button again to stop the recording process (the
record icon will disappear in the top left of the screen).
10. The recorded audio file (in .wav format) will appear in the Shared Documents >
Wav folder in My Computer.
11. Double-click the file to playback the recorded audio.
Hot Key Program
The audio record
function will only run if
the program is running
(i.e. the icon
is
displayed in the taskbar).
If you have closed the
program you can run it
again from C:\Program
Files\HotKey_Driver\H
otKeyDriver.exe.