Eurocom M660N MILANO User Manual
Page 129
Troubleshooting
Problems and Possible Solutions 8 - 11
8
The Wireless LAN/
Bluetooth modules
cannot be detected.
The modules are off. Check the LED indicator
and/or function key indicator to see if the
WLAN/Bluetooth module is on or off (see
“LED Indicators” on page 1 - 8
). If the LED indicator is
off, then press the Fn + F11 (WLAN) or Fn + F12 (Bluetooth) key combination(s) in order to
enable the modules (see
“Function Keys” on page 1 - 11
).
The PC Camera module
cannot be detected.
The module is off. Press the Fn + F10 key combination in order to enable the module (see
“Function Keys” on page 1 - 11
). Run the BisonCap program (see
) to view
the camera picture.
The Wireless LAN/
Bluetooth/ PC Camera
modules cannot be
configured.
The driver(s) for the module(s) have not been installed. Make sure you have installed the driver
for the appropriate module (see the instructions for the appropriate module in
“Driver Installation” on page D - 30
).
No visual indicators
appear when using the
Function Key
combinations, or the
audio record function
does not work.
The hot key driver is not running/installed (the icon will not appear in the taskbar). Make sure you
have installed the driver. If you do not see the icon in the taskbar
/
you can run the program
again from C:\Program Files\HotKey_Driver\HotKeyDriver.exe.
Problem
Possible Cause - Solution