Pc camera audio setup, Pc camera audio setup -11 – Eurocom M660N MILANO User Manual
Page 113
Modules & Options
PC Camera Module 7 - 11
7
PC Camera Audio Setup
If you wish to capture video & audio with your camera, it is necessary to setup the
audio recording options in Windows.
1.
Click Start, and click Control Panel (or point to Settings and click Control Panel).
2.
Click Sound (Hardware and Sound).
3.
Click Recording (tab).
4.
Right-click Line-In/Microphone (Realtek High Definition Audio) and make sure
the item is not disabled.
5.
Double-click Line-In/Microphone (or select Properties from the right-click menu).
6.
Click Levels (tab), and adjust the Line-In/Microphone slider to the level required.
7.
Click OK and close the control panels.
8.
Run the BisonCap application program from the Start > Programs/All Programs
> BisonCam menu (or press the application button
).
9.
Go to the Devices menu heading and select the appropriate recording device (it
should have a tick alongside it) e.g Microphone (Realtek High Definition Audio).
10. Go to the Capture menu heading and select Capture Audio (it should have a tick
alongside it).