Eurocom M570A DIVINE - Manual (Page 144)

ATI Video Driver Controls
B - 4 Display Devices
B
Display Devices
Besides the built-in LCD, you can also use an external monitor/flat panel dis-
play or TV as your display device. The following are the display options:
1. The built-in LCD.
2. An external monitor connected to the DVI-Out port (may require DVI to VGA
converter).
3. A flat panel display connected to the DVI-Out port (may require DVI to VGA
converter).
4. A TV (Model B computers with ATI Mobility Radeon X800 XT video cards
also support HDTV, but require an HDTV converter*) connected to the S-
Video-Out port.
*Note: Contact your service center for the HDTV converter.
Theater Mode
Theater Mode can be
enabled by clicking
Theater Mode Op-
tions (button) in the
Overlay tab from the
ATI Mobility Radeon
Properties. (see
Fig-
ure B - 2 ). Theater
Mode enables you to
display video playback
in full screen on a sec-
ondary monitor.
Theater Mode is not
supported if you have
the TV Tuner module
installed.
Monitor and TV Tuner
If you are connecting both a monitor/flat panel display to the DVI-Out port, and a
cable/aerial to the optional TV Tuner module, make sure you attach the cable/
aerial to the TV Tuner first, then the monitor.