Pc camera audio setup, Pc camera audio setup -10 – Eurocom M570A DIVINE User Manual
Page 118
Modules & Options
7 - 10 PC Camera Module
7
PC Camera Audio Setup
If you wish to capture video & audio with your camera, it is necessary to setup
the audio recording options in Windows (see
).
1.
Go to the Start menu and point to Settings (or just click Control Panel) and
click Control Panel, then double-click the Sounds & Audio Devices icon
(Sounds, Speech, and Audio Devices in Category View).
2.
Click Advanced in the Device volume tab.
3.
Click Options, scroll down and click Properties.
4.
Select Realtek HD Audio input from the Mixer device menu.
5.
Click Mic Volume (check box) if it is not checked, then click OK.
6.
Make sure the Select (check box) in the Recording Control panel, under
the Mic Volume section, is checked (boost the volume as high as it will go).
7.
Click OK and close the windows.
8.
Run the BisonCap application program from the Start > Programs/All
Programs > BisonCam menu.
9.
Go to the Devices menu heading and select Realtek HD Audio input (it
should have a tick alongside it).
10. Go to the Capture menu heading and select Capture Audio (it should have
a tick alongside it).