Eurocom X7200 Panther 2.0 - Manual (Page 12)

Concise User’s Guide
RAID Setup - 7
Engl
ish
6. Press Enter and select (if applicable) the Strip Size (best set
to default).
7. Press Enter and select the Capacity size (best set to default).
8. Press Enter to select Create Volume.
9. Press Enter to create the volume, and confirm the selection
by pressing Y.
10. This will now return to the main menu.
Figure 3 - RAID Created
11. Select 5.Exit and press Enter, then press Y to exit the RAID
configuration menu.
12. Make sure the Windows 7 OS DVD is in the DVD drive. and
as the computer starts up it will automatically boot from the
Windows 7 OS DVD.
13. Click Next to continue installing the operating system as
normal (see your Windows documentation if you need help
on installing the Windows OS).
14. Install the Windows drivers as per Table 5 on page 19 .