Eurocom Neptune 3 - Manual (Page 171)

Upgrading The Computer
Upgrading the Hard Disk Drive(s) 6 - 17
6
Removing the Hard Disk from the Caddy HDD Bay (Models A & C)
Note that the secondary hard disk module is used to replace the optical device mod-
ule (CD/DVD) in Models A & C computers.
1. Turn the computer off, remove the AC/DC adapter (and battery) and turn the computer over.
2. Remove the optical device (see page 6 - 7 or page 6 - 8 ).
3. Remove screws - from the rear of the secondary HDD module assembly.
4. Slide the HDD in the direction of arrow .
5. Remove the HDD from the module caddy .
6. Reverse the process to install a new hard disk.
Figure 6 - 12
Removing the
Secondary HDD
from the Module
Caddy
(Models A & C)
1 4
5
6 7
2 1
4 3
5
6 7