Eurocom Neptune 4W - Manual (Page 192)

Upgrading The Computer
6 - 30 Upgrading the mSATA SSD
6
Upgrading the mSATA SSD
1. Turn the computer off, remove the AC/DC adapter (and battery) and turn the computer over.
2. Remove the component bay cover (see the appropriate component bay cover
removal page for your model).
3. Locate the mSATA SSD .
4. Remove screw and the module will pop up.
5. You can then remove the module and replace it if necessary.
6. Replace the component bay cover (see page 6 - 30 ).
Figure 6 - 30
Removing the
mSATA SSD
1
2
3
Models A, C & D Model B
Model E
Model F
1
2
3